[ 2.243] X.Org X Server 1.21.1.16 X Protocol Version 11, Revision 0 [ 2.243] Current Operating System: Linux (none) 6.12.33+kali-amd64 #1 SMP PREEMPT_DYNAMIC Kali 6.12.33-1kali1 (2025-06-25) x86_64 [ 2.243] Kernel command line: BOOT_IMAGE=/install.amd/vmlinuz net.ifnames=0 preseed/file=/cdrom/simple-cdd/default.preseed simple-cdd/profiles=kali,offline desktop=xfce vga=788 initrd=/install.amd/gtk/initrd.gz --- quiet [ 2.244] xorg-server 2:21.1.16-1.1 (https://www.debian.org/support) [ 2.244] Current version of pixman: 0.44.0 [ 2.244] Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. [ 2.244] Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. [ 2.245] (==) Log file: "/var/log/Xorg.0.log", Time: Thu Aug 7 05:42:49 2025 [ 2.245] (==) Using system config directory "/usr/share/X11/xorg.conf.d" [ 2.245] (==) No Layout section. Using the first Screen section. [ 2.245] (==) No screen section available. Using defaults. [ 2.245] (**) |-->Screen "Default Screen Section" (0) [ 2.245] (**) | |-->Monitor "" [ 2.245] (==) No monitor specified for screen "Default Screen Section". Using a default monitor configuration. [ 2.245] (**) Allowing byte-swapped clients [ 2.245] (==) Automatically adding devices [ 2.245] (==) Automatically enabling devices [ 2.245] (==) Automatically adding GPU devices [ 2.245] (==) Automatically binding GPU devices [ 2.245] (==) Max clients allowed: 256, resource mask: 0x1fffff [ 2.245] (==) FontPath set to: built-ins [ 2.245] (==) ModulePath set to "/usr/lib/xorg/modules" [ 2.245] (II) The server relies on udev to provide the list of input devices. If no devices become available, reconfigure udev or disable AutoAddDevices. [ 2.245] (II) Loader magic: 0x558a14aa9ba0 [ 2.245] (II) Module ABI versions: [ 2.245] X.Org ANSI C Emulation: 0.4 [ 2.245] X.Org Video Driver: 25.2 [ 2.245] X.Org XInput driver : 24.4 [ 2.245] X.Org Server Extension : 10.0 [ 2.245] (II) xfree86: Adding drm device (/dev/dri/card0) [ 2.245] (II) Platform probe for /sys/devices/pci0000:00/0000:00:02.0/drm/card0 [ 2.246] (--) PCI:*(0@0:2:0) 1234:1111:1af4:1100 rev 2, Mem @ 0xfd000000/16777216, 0xfebf0000/4096, BIOS @ 0x????????/131072 [ 2.246] (==) Matched modesetting as autoconfigured driver 0 [ 2.246] (==) Matched fbdev as autoconfigured driver 1 [ 2.246] (==) Matched vesa as autoconfigured driver 2 [ 2.246] (==) Assigned the driver to the xf86ConfigLayout [ 2.246] (II) LoadModule: "modesetting" [ 2.246] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so [ 2.246] (II) Module modesetting: vendor="X.Org Foundation" [ 2.246] compiled for 1.21.1.16, module version = 1.21.1 [ 2.246] Module class: X.Org Video Driver [ 2.246] ABI class: X.Org Video Driver, version 25.2 [ 2.246] (II) LoadModule: "fbdev" [ 2.246] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so [ 2.246] (II) Module fbdev: vendor="X.Org Foundation" [ 2.246] compiled for 1.21.1.3, module version = 0.5.0 [ 2.246] Module class: X.Org Video Driver [ 2.246] ABI class: X.Org Video Driver, version 25.2 [ 2.246] (II) LoadModule: "vesa" [ 2.246] (WW) Warning, couldn't open module vesa [ 2.246] (EE) Failed to load module "vesa" (module does not exist, 0) [ 2.246] (II) modesetting: Driver for Modesetting Kernel Drivers: kms [ 2.246] (II) FBDEV: driver for framebuffer: fbdev [ 2.246] (--) using VT number 5 [ 2.248] (II) modeset(0): using drv /dev/dri/card0 [ 2.248] (WW) Falling back to old probe method for fbdev [ 2.248] (II) Loading sub module "fbdevhw" [ 2.248] (II) LoadModule: "fbdevhw" [ 2.248] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so [ 2.248] (II) Module fbdevhw: vendor="X.Org Foundation" [ 2.248] compiled for 1.21.1.16, module version = 0.0.2 [ 2.248] ABI class: X.Org Video Driver, version 25.2 [ 2.248] (II) modeset(0): Creating default Display subsection in Screen section "Default Screen Section" for depth/fbbpp 24/32 [ 2.248] (==) modeset(0): Depth 24, (==) framebuffer bpp 32 [ 2.248] (==) modeset(0): RGB weight 888 [ 2.248] (==) modeset(0): Default visual is TrueColor [ 2.248] (II) modeset(0): No glamor support in the X Server [ 2.248] (II) modeset(0): ShadowFB: preferred NO, enabled NO [ 2.248] (II) modeset(0): Output Virtual-1 has no monitor section [ 2.248] (II) modeset(0): EDID for output Virtual-1 [ 2.248] (II) modeset(0): Manufacturer: RHT Model: 1234 Serial#: 0 [ 2.248] (II) modeset(0): Year: 2014 Week: 42 [ 2.248] (II) modeset(0): EDID Version: 1.4 [ 2.248] (II) modeset(0): Digital Display Input [ 2.248] (II) modeset(0): 8 bits per channel [ 2.248] (II) modeset(0): Digital interface is DisplayPort [ 2.248] (II) modeset(0): Max Image Size [cm]: horiz.: 32 vert.: 20 [ 2.248] (II) modeset(0): Gamma: 2.20 [ 2.248] (II) modeset(0): No DPMS capabilities specified [ 2.248] (II) modeset(0): Supported color encodings: RGB 4:4:4 [ 2.248] (II) modeset(0): Default color space is primary color space [ 2.248] (II) modeset(0): First detailed timing is preferred mode [ 2.248] (II) modeset(0): Preferred mode is native pixel format and refresh rate [ 2.248] (II) modeset(0): redX: 0.640 redY: 0.330 greenX: 0.300 greenY: 0.600 [ 2.248] (II) modeset(0): blueX: 0.150 blueY: 0.060 whiteX: 0.312 whiteY: 0.329 [ 2.248] (II) modeset(0): Supported established timings: [ 2.248] (II) modeset(0): 640x480@60Hz [ 2.248] (II) modeset(0): 800x600@60Hz [ 2.248] (II) modeset(0): 1024x768@60Hz [ 2.248] (II) modeset(0): Manufacturer's mask: 0 [ 2.248] (II) modeset(0): Supported standard timings: [ 2.248] (II) modeset(0): #0: hsize: 2048 vsize 1152 refresh: 60 vid: 49377 [ 2.248] (II) modeset(0): #1: hsize: 1920 vsize 1080 refresh: 60 vid: 49361 [ 2.248] (II) modeset(0): #2: hsize: 1920 vsize 1200 refresh: 60 vid: 209 [ 2.248] (II) modeset(0): #3: hsize: 1600 vsize 1200 refresh: 60 vid: 16553 [ 2.248] (II) modeset(0): #4: hsize: 1680 vsize 1050 refresh: 60 vid: 179 [ 2.248] (II) modeset(0): #5: hsize: 1440 vsize 900 refresh: 60 vid: 149 [ 2.248] (II) modeset(0): #6: hsize: 1280 vsize 1024 refresh: 60 vid: 32897 [ 2.248] (II) modeset(0): #7: hsize: 1280 vsize 960 refresh: 60 vid: 16513 [ 2.248] (II) modeset(0): Supported detailed timing: [ 2.248] (II) modeset(0): clock: 107.3 MHz Image Size: 325 x 203 mm [ 2.248] (II) modeset(0): h_active: 1280 h_sync: 1600 h_sync_end 1638 h_blank_end 1728 h_border: 0 [ 2.248] (II) modeset(0): v_active: 800 v_sync: 804 v_sync_end 808 v_blanking: 828 v_border: 0 [ 2.248] (II) modeset(0): Established timings III: (not decoded) [ 2.248] (II) modeset(0): Ranges: V min: 50 V max: 125 Hz, H min: 30 H max: 160 kHz, [ 2.248] (II) modeset(0): Monitor name: QEMU Monitor [ 2.248] (II) modeset(0): Number of EDID sections to follow: 1 [ 2.248] (II) modeset(0): EDID (in hex): [ 2.248] (II) modeset(0): 00ffffffffffff004914341200000000 [ 2.248] (II) modeset(0): 2a180104a520147806ee91a3544c9926 [ 2.248] (II) modeset(0): 0f5054210800e1c0d1c0d100a940b300 [ 2.248] (II) modeset(0): 950081808140ea2900c051201c304026 [ 2.248] (II) modeset(0): 444045cb10000018000000f7000a0040 [ 2.248] (II) modeset(0): 82002820000000000000000000fd0032 [ 2.248] (II) modeset(0): 7d1ea0ff010a202020202020000000fc [ 2.248] (II) modeset(0): 0051454d55204d6f6e69746f720a013a [ 2.248] (II) modeset(0): 02030b00467d6560591f610000001000 [ 2.248] (II) modeset(0): 00000000000000000000000000000000 [ 2.248] (II) modeset(0): 10000000000000000000000000000000 [ 2.248] (II) modeset(0): 00001000000000000000000000000000 [ 2.248] (II) modeset(0): 00000000100000000000000000000000 [ 2.248] (II) modeset(0): 00000000000010000000000000000000 [ 2.248] (II) modeset(0): 00000000000000001000000000000000 [ 2.248] (II) modeset(0): 0000000000000000000000000000002f [ 2.248] (II) modeset(0): Printing probed modes for output Virtual-1 [ 2.248] (II) modeset(0): Modeline "1280x800"x75.0 107.30 1280 1600 1638 1728 800 804 808 828 -hsync -vsync (62.1 kHz eP) [ 2.248] (II) modeset(0): Modeline "1920x1080"x60.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 -hsync -vsync (67.5 kHz e) [ 2.248] (II) modeset(0): Modeline "1920x1080"x50.0 148.50 1920 2448 2492 2640 1080 1084 1089 1125 +hsync +vsync (56.2 kHz e) [ 2.248] (II) modeset(0): Modeline "1600x1200"x60.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz e) [ 2.248] (II) modeset(0): Modeline "1680x1050"x60.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz e) [ 2.248] (II) modeset(0): Modeline "1400x1050"x60.0 121.75 1400 1488 1632 1864 1050 1053 1057 1089 -hsync +vsync (65.3 kHz e) [ 2.248] (II) modeset(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e) [ 2.248] (II) modeset(0): Modeline "1440x900"x59.9 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz e) [ 2.248] (II) modeset(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e) [ 2.248] (II) modeset(0): Modeline "1360x768"x60.0 85.50 1360 1424 1536 1792 768 771 777 795 +hsync +vsync (47.7 kHz e) [ 2.248] (II) modeset(0): Modeline "1280x768"x59.9 79.50 1280 1344 1472 1664 768 771 778 798 -hsync +vsync (47.8 kHz e) [ 2.248] (II) modeset(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e) [ 2.248] (II) modeset(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e) [ 2.248] (II) modeset(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e) [ 2.248] (II) modeset(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e) [ 2.248] (II) modeset(0): Output Virtual-1 connected [ 2.248] (II) modeset(0): Using exact sizes for initial modes [ 2.248] (II) modeset(0): Output Virtual-1 using initial mode 1280x800 +0+0 [ 2.248] (==) modeset(0): Using gamma correction (1.0, 1.0, 1.0) [ 2.248] (==) modeset(0): DPI set to (96, 96) [ 2.248] (II) Loading sub module "fb" [ 2.248] (II) LoadModule: "fb" [ 2.248] (II) Module "fb" already built-in [ 2.248] (II) UnloadModule: "fbdev" [ 2.248] (II) Unloading fbdev [ 2.248] (II) UnloadSubModule: "fbdevhw" [ 2.248] (II) Unloading fbdevhw [ 2.248] (==) modeset(0): Backing store disabled [ 2.248] (==) modeset(0): Silken mouse enabled [ 2.248] (II) modeset(0): Initializing kms color map for depth 24, 8 bpc. [ 2.249] (==) modeset(0): DPMS enabled [ 2.249] (II) Initializing extension Generic Event Extension [ 2.249] (II) Initializing extension SHAPE [ 2.249] (II) Initializing extension MIT-SHM [ 2.249] (II) Initializing extension XInputExtension [ 2.249] (II) Initializing extension XTEST [ 2.249] (II) Initializing extension BIG-REQUESTS [ 2.249] (II) Initializing extension SYNC [ 2.249] (II) Initializing extension XKEYBOARD [ 2.249] (II) Initializing extension XC-MISC [ 2.249] (II) Initializing extension XFIXES [ 2.249] (II) Initializing extension RENDER [ 2.249] (II) Initializing extension RANDR [ 2.249] (II) Initializing extension DAMAGE [ 2.249] (II) Initializing extension DOUBLE-BUFFER [ 2.249] (II) Initializing extension DPMS [ 2.249] (II) Initializing extension Present [ 2.249] (II) Initializing extension DRI3 [ 2.249] (II) Initializing extension X-Resource [ 2.249] (II) Initializing extension XFree86-DGA [ 2.249] (II) Initializing extension DRI2 [ 2.249] (II) modeset(0): Damage tracking initialized [ 2.249] (II) modeset(0): Setting screen physical size to 338 x 211 [ 2.262] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0) [ 2.262] (**) AT Translated Set 2 keyboard: Applying InputClass "libinput keyboard catchall" [ 2.262] (II) LoadModule: "libinput" [ 2.262] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so [ 2.262] (II) Module libinput: vendor="X.Org Foundation" [ 2.262] compiled for 1.21.1.15, module version = 1.5.0 [ 2.262] Module class: X.Org XInput Driver [ 2.262] ABI class: X.Org XInput driver, version 24.4 [ 2.262] (II) Using input driver 'libinput' for 'AT Translated Set 2 keyboard' [ 2.262] (**) AT Translated Set 2 keyboard: always reports core events [ 2.262] (**) Option "Device" "/dev/input/event0" [ 2.263] (II) event0 - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard [ 2.263] (II) event0 - AT Translated Set 2 keyboard: device is a keyboard [ 2.264] (II) event0 - AT Translated Set 2 keyboard: device removed [ 2.288] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0" [ 2.288] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 6) [ 2.288] (II) event0 - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard [ 2.288] (II) event0 - AT Translated Set 2 keyboard: device is a keyboard [ 2.289] (II) config/udev: Adding input device VirtualPS/2 VMware VMMouse (/dev/input/event2) [ 2.289] (**) VirtualPS/2 VMware VMMouse: Applying InputClass "libinput pointer catchall" [ 2.289] (II) Using input driver 'libinput' for 'VirtualPS/2 VMware VMMouse' [ 2.289] (**) VirtualPS/2 VMware VMMouse: always reports core events [ 2.289] (**) Option "Device" "/dev/input/event2" [ 2.290] (II) event2 - VirtualPS/2 VMware VMMouse: is tagged by udev as: Mouse [ 2.290] (II) event2 - VirtualPS/2 VMware VMMouse: device is a pointer [ 2.290] (II) event2 - VirtualPS/2 VMware VMMouse: device removed [ 2.312] (II) libinput: VirtualPS/2 VMware VMMouse: Step value 0 was provided, libinput Fallback acceleration function is used. [ 2.312] (II) libinput: VirtualPS/2 VMware VMMouse: Step value 0 was provided, libinput Fallback acceleration function is used. [ 2.312] (II) libinput: VirtualPS/2 VMware VMMouse: Step value 0 was provided, libinput Fallback acceleration function is used. [ 2.312] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input2/event2" [ 2.312] (II) XINPUT: Adding extended input device "VirtualPS/2 VMware VMMouse" (type: MOUSE, id 7) [ 2.312] (**) Option "AccelerationScheme" "none" [ 2.312] (**) VirtualPS/2 VMware VMMouse: (accel) selected scheme none/0 [ 2.312] (**) VirtualPS/2 VMware VMMouse: (accel) acceleration factor: 2.000 [ 2.312] (**) VirtualPS/2 VMware VMMouse: (accel) acceleration threshold: 4 [ 2.314] (II) event2 - VirtualPS/2 VMware VMMouse: is tagged by udev as: Mouse [ 2.314] (II) event2 - VirtualPS/2 VMware VMMouse: device is a pointer [ 2.316] (II) config/udev: Adding input device VirtualPS/2 VMware VMMouse (/dev/input/mouse1) [ 2.316] (II) No input driver specified, ignoring this device. [ 2.316] (II) This device may have been added with another device file. [ 2.317] (II) config/udev: Adding input device VirtualPS/2 VMware VMMouse (/dev/input/event1) [ 2.317] (**) VirtualPS/2 VMware VMMouse: Applying InputClass "libinput pointer catchall" [ 2.317] (II) Using input driver 'libinput' for 'VirtualPS/2 VMware VMMouse' [ 2.317] (**) VirtualPS/2 VMware VMMouse: always reports core events [ 2.317] (**) Option "Device" "/dev/input/event1" [ 2.318] (II) event1 - VirtualPS/2 VMware VMMouse: is tagged by udev as: Mouse [ 2.319] (II) event1 - VirtualPS/2 VMware VMMouse: device is a pointer [ 2.319] (II) event1 - VirtualPS/2 VMware VMMouse: device removed [ 2.340] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input3/event1" [ 2.340] (II) XINPUT: Adding extended input device "VirtualPS/2 VMware VMMouse" (type: MOUSE, id 8) [ 2.340] (**) Option "AccelerationScheme" "none" [ 2.340] (**) VirtualPS/2 VMware VMMouse: (accel) selected scheme none/0 [ 2.340] (**) VirtualPS/2 VMware VMMouse: (accel) acceleration factor: 2.000 [ 2.340] (**) VirtualPS/2 VMware VMMouse: (accel) acceleration threshold: 4 [ 2.342] (II) event1 - VirtualPS/2 VMware VMMouse: is tagged by udev as: Mouse [ 2.342] (II) event1 - VirtualPS/2 VMware VMMouse: device is a pointer [ 2.344] (II) config/udev: Adding input device VirtualPS/2 VMware VMMouse (/dev/input/mouse0) [ 2.344] (II) No input driver specified, ignoring this device. [ 2.344] (II) This device may have been added with another device file. [ 2.353] (II) modeset(0): Disabling kernel dirty updates, not required. [ 144.478] (II) modeset(0): EDID vendor "RHT", prod id 4660 [ 144.478] (II) modeset(0): Using EDID range info for horizontal sync [ 144.478] (II) modeset(0): Using EDID range info for vertical refresh [ 144.478] (II) modeset(0): Printing DDC gathered Modelines: [ 144.478] (II) modeset(0): Modeline "1280x800"x0.0 107.30 1280 1600 1638 1728 800 804 808 828 -hsync -vsync (62.1 kHz eP) [ 144.478] (II) modeset(0): Modeline "1280x768"x0.0 79.50 1280 1344 1472 1664 768 771 778 798 -hsync +vsync (47.8 kHz e) [ 144.478] (II) modeset(0): Modeline "1360x768"x0.0 85.50 1360 1424 1536 1792 768 771 777 795 +hsync +vsync (47.7 kHz e) [ 144.478] (II) modeset(0): Modeline "1400x1050"x0.0 121.75 1400 1488 1632 1864 1050 1053 1057 1089 -hsync +vsync (65.3 kHz e) [ 144.478] (II) modeset(0): Modeline "1792x1344"x0.0 204.75 1792 1920 2120 2448 1344 1345 1348 1394 -hsync +vsync (83.6 kHz e) [ 144.478] (II) modeset(0): Modeline "1856x1392"x0.0 218.25 1856 1952 2176 2528 1392 1393 1396 1439 -hsync +vsync (86.3 kHz e) [ 144.478] (II) modeset(0): Modeline "1920x1440"x0.0 234.00 1920 2048 2256 2600 1440 1441 1444 1500 -hsync +vsync (90.0 kHz e) [ 144.478] (II) modeset(0): Modeline "1920x1080"x0.0 148.50 1920 2448 2492 2640 1080 1084 1089 1125 +hsync +vsync (56.2 kHz e) [ 144.478] (II) modeset(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e) [ 144.478] (II) modeset(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e) [ 144.478] (II) modeset(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e) [ 144.478] (II) modeset(0): Modeline "2048x1152"x60.0 197.97 2048 2184 2408 2768 1152 1153 1156 1192 -hsync +vsync (71.5 kHz e) [ 144.478] (II) modeset(0): Modeline "1920x1080"x60.0 172.80 1920 2040 2248 2576 1080 1081 1084 1118 -hsync +vsync (67.1 kHz e) [ 144.478] (II) modeset(0): Modeline "1920x1200"x0.0 193.25 1920 2056 2256 2592 1200 1203 1209 1245 -hsync +vsync (74.6 kHz e) [ 144.479] (II) modeset(0): Modeline "1600x1200"x0.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz e) [ 144.479] (II) modeset(0): Modeline "1680x1050"x0.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz e) [ 144.479] (II) modeset(0): Modeline "1440x900"x0.0 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz e) [ 144.479] (II) modeset(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e) [ 144.479] (II) modeset(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e) [ 144.479] (II) config/udev: removing GPU device /sys/devices/pci0000:00/0000:00:02.0/drm/card0 /dev/dri/card0 [ 144.479] xf86: remove device 0 /sys/devices/pci0000:00/0000:00:02.0/drm/card0 [ 144.479] failed to find screen to remove [ 144.486] (II) config/udev: Adding input device VirtualPS/2 VMware VMMouse (/dev/input/mouse1) [ 144.486] (II) No input driver specified, ignoring this device. [ 144.486] (II) This device may have been added with another device file. [ 144.490] (II) config/udev: Adding input device VirtualPS/2 VMware VMMouse (/dev/input/mouse0) [ 144.490] (II) No input driver specified, ignoring this device. [ 144.490] (II) This device may have been added with another device file. [ 144.502] (II) config/udev: removing device VirtualPS/2 VMware VMMouse [ 144.502] (II) event2 - VirtualPS/2 VMware VMMouse: device removed [ 144.516] (II) UnloadModule: "libinput" [ 144.516] (II) config/udev: Adding input device VirtualPS/2 VMware VMMouse (/dev/input/event2) [ 144.516] (**) VirtualPS/2 VMware VMMouse: Applying InputClass "libinput pointer catchall" [ 144.516] (II) Using input driver 'libinput' for 'VirtualPS/2 VMware VMMouse' [ 144.516] (**) VirtualPS/2 VMware VMMouse: always reports core events [ 144.516] (**) Option "Device" "/dev/input/event2" [ 144.516] (II) event2 - VirtualPS/2 VMware VMMouse: is tagged by udev as: Mouse [ 144.516] (II) event2 - VirtualPS/2 VMware VMMouse: device is a pointer [ 144.516] (II) event2 - VirtualPS/2 VMware VMMouse: device removed [ 144.532] (II) libinput: VirtualPS/2 VMware VMMouse: Step value 0 was provided, libinput Fallback acceleration function is used. [ 144.532] (II) libinput: VirtualPS/2 VMware VMMouse: Step value 0 was provided, libinput Fallback acceleration function is used. [ 144.532] (II) libinput: VirtualPS/2 VMware VMMouse: Step value 0 was provided, libinput Fallback acceleration function is used. [ 144.532] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input2/event2" [ 144.532] (II) XINPUT: Adding extended input device "VirtualPS/2 VMware VMMouse" (type: MOUSE, id 7) [ 144.532] (**) Option "AccelerationScheme" "none" [ 144.532] (**) VirtualPS/2 VMware VMMouse: (accel) selected scheme none/0 [ 144.532] (**) VirtualPS/2 VMware VMMouse: (accel) acceleration factor: 2.000 [ 144.532] (**) VirtualPS/2 VMware VMMouse: (accel) acceleration threshold: 4 [ 144.532] (II) event2 - VirtualPS/2 VMware VMMouse: is tagged by udev as: Mouse [ 144.532] (II) event2 - VirtualPS/2 VMware VMMouse: device is a pointer [ 144.532] (II) config/udev: removing device AT Translated Set 2 keyboard [ 144.532] (II) event0 - AT Translated Set 2 keyboard: device removed [ 144.556] (II) UnloadModule: "libinput" [ 144.556] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0) [ 144.556] (**) AT Translated Set 2 keyboard: Applying InputClass "libinput keyboard catchall" [ 144.556] (II) Using input driver 'libinput' for 'AT Translated Set 2 keyboard' [ 144.556] (**) AT Translated Set 2 keyboard: always reports core events [ 144.556] (**) Option "Device" "/dev/input/event0" [ 144.556] (II) event0 - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard [ 144.556] (II) event0 - AT Translated Set 2 keyboard: device is a keyboard [ 144.556] (II) event0 - AT Translated Set 2 keyboard: device removed [ 144.572] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0" [ 144.572] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 6) [ 144.572] (**) Option "xkb_model" "pc105" [ 144.572] (**) Option "xkb_layout" "us" [ 144.572] (WW) Option "xkb_variant" requires a string value [ 144.572] (WW) Option "xkb_options" requires a string value [ 144.572] (II) event0 - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard [ 144.572] (II) event0 - AT Translated Set 2 keyboard: device is a keyboard [ 144.574] (II) config/udev: removing device VirtualPS/2 VMware VMMouse [ 144.574] (II) event1 - VirtualPS/2 VMware VMMouse: device removed [ 144.588] (II) UnloadModule: "libinput" [ 144.588] (II) config/udev: Adding input device VirtualPS/2 VMware VMMouse (/dev/input/event1) [ 144.588] (**) VirtualPS/2 VMware VMMouse: Applying InputClass "libinput pointer catchall" [ 144.588] (II) Using input driver 'libinput' for 'VirtualPS/2 VMware VMMouse' [ 144.588] (**) VirtualPS/2 VMware VMMouse: always reports core events [ 144.588] (**) Option "Device" "/dev/input/event1" [ 144.588] (II) event1 - VirtualPS/2 VMware VMMouse: is tagged by udev as: Mouse [ 144.588] (II) event1 - VirtualPS/2 VMware VMMouse: device is a pointer [ 144.588] (II) event1 - VirtualPS/2 VMware VMMouse: device removed [ 144.604] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input3/event1" [ 144.604] (II) XINPUT: Adding extended input device "VirtualPS/2 VMware VMMouse" (type: MOUSE, id 8) [ 144.604] (**) Option "AccelerationScheme" "none" [ 144.604] (**) VirtualPS/2 VMware VMMouse: (accel) selected scheme none/0 [ 144.604] (**) VirtualPS/2 VMware VMMouse: (accel) acceleration factor: 2.000 [ 144.604] (**) VirtualPS/2 VMware VMMouse: (accel) acceleration threshold: 4 [ 144.604] (II) event1 - VirtualPS/2 VMware VMMouse: is tagged by udev as: Mouse [ 144.604] (II) event1 - VirtualPS/2 VMware VMMouse: device is a pointer [ 154.636] (II) modeset(0): EDID vendor "RHT", prod id 4660 [ 154.637] (II) modeset(0): Using hsync ranges from config file [ 154.637] (II) modeset(0): Using vrefresh ranges from config file [ 154.637] (II) modeset(0): Printing DDC gathered Modelines: [ 154.637] (II) modeset(0): Modeline "1280x800"x0.0 107.30 1280 1600 1638 1728 800 804 808 828 -hsync -vsync (62.1 kHz eP) [ 154.637] (II) modeset(0): Modeline "1280x768"x0.0 79.50 1280 1344 1472 1664 768 771 778 798 -hsync +vsync (47.8 kHz e) [ 154.637] (II) modeset(0): Modeline "1360x768"x0.0 85.50 1360 1424 1536 1792 768 771 777 795 +hsync +vsync (47.7 kHz e) [ 154.637] (II) modeset(0): Modeline "1400x1050"x0.0 121.75 1400 1488 1632 1864 1050 1053 1057 1089 -hsync +vsync (65.3 kHz e) [ 154.637] (II) modeset(0): Modeline "1792x1344"x0.0 204.75 1792 1920 2120 2448 1344 1345 1348 1394 -hsync +vsync (83.6 kHz e) [ 154.637] (II) modeset(0): Modeline "1856x1392"x0.0 218.25 1856 1952 2176 2528 1392 1393 1396 1439 -hsync +vsync (86.3 kHz e) [ 154.637] (II) modeset(0): Modeline "1920x1440"x0.0 234.00 1920 2048 2256 2600 1440 1441 1444 1500 -hsync +vsync (90.0 kHz e) [ 154.637] (II) modeset(0): Modeline "1920x1080"x0.0 148.50 1920 2448 2492 2640 1080 1084 1089 1125 +hsync +vsync (56.2 kHz e) [ 154.637] (II) modeset(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e) [ 154.637] (II) modeset(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e) [ 154.637] (II) modeset(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e) [ 154.637] (II) modeset(0): Modeline "2048x1152"x60.0 197.97 2048 2184 2408 2768 1152 1153 1156 1192 -hsync +vsync (71.5 kHz e) [ 154.637] (II) modeset(0): Modeline "1920x1080"x60.0 172.80 1920 2040 2248 2576 1080 1081 1084 1118 -hsync +vsync (67.1 kHz e) [ 154.637] (II) modeset(0): Modeline "1920x1200"x0.0 193.25 1920 2056 2256 2592 1200 1203 1209 1245 -hsync +vsync (74.6 kHz e) [ 154.637] (II) modeset(0): Modeline "1600x1200"x0.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz e) [ 154.637] (II) modeset(0): Modeline "1680x1050"x0.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz e) [ 154.637] (II) modeset(0): Modeline "1440x900"x0.0 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz e) [ 154.637] (II) modeset(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e) [ 154.637] (II) modeset(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e) [ 154.644] (II) config/udev: removing GPU device /sys/devices/pci0000:00/0000:00:02.0/drm/card0 /dev/dri/card0 [ 154.644] xf86: remove device 0 /sys/devices/pci0000:00/0000:00:02.0/drm/card0 [ 154.644] failed to find screen to remove [ 154.647] (II) config/udev: Adding input device VirtualPS/2 VMware VMMouse (/dev/input/mouse1) [ 154.647] (II) No input driver specified, ignoring this device. [ 154.647] (II) This device may have been added with another device file. [ 154.660] (II) config/udev: Adding input device VirtualPS/2 VMware VMMouse (/dev/input/mouse0) [ 154.660] (II) No input driver specified, ignoring this device. [ 154.660] (II) This device may have been added with another device file. [ 154.669] (II) config/udev: removing device VirtualPS/2 VMware VMMouse [ 154.669] (II) event2 - VirtualPS/2 VMware VMMouse: device removed [ 154.684] (II) UnloadModule: "libinput" [ 154.684] (II) config/udev: Adding input device VirtualPS/2 VMware VMMouse (/dev/input/event2) [ 154.684] (**) VirtualPS/2 VMware VMMouse: Applying InputClass "libinput pointer catchall" [ 154.684] (II) Using input driver 'libinput' for 'VirtualPS/2 VMware VMMouse' [ 154.684] (**) VirtualPS/2 VMware VMMouse: always reports core events [ 154.684] (**) Option "Device" "/dev/input/event2" [ 154.684] (II) event2 - VirtualPS/2 VMware VMMouse: is tagged by udev as: Mouse [ 154.684] (II) event2 - VirtualPS/2 VMware VMMouse: device is a pointer [ 154.684] (II) event2 - VirtualPS/2 VMware VMMouse: device removed [ 154.700] (II) libinput: VirtualPS/2 VMware VMMouse: Step value 0 was provided, libinput Fallback acceleration function is used. [ 154.700] (II) libinput: VirtualPS/2 VMware VMMouse: Step value 0 was provided, libinput Fallback acceleration function is used. [ 154.700] (II) libinput: VirtualPS/2 VMware VMMouse: Step value 0 was provided, libinput Fallback acceleration function is used. [ 154.700] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input2/event2" [ 154.700] (II) XINPUT: Adding extended input device "VirtualPS/2 VMware VMMouse" (type: MOUSE, id 7) [ 154.700] (**) Option "AccelerationScheme" "none" [ 154.700] (**) VirtualPS/2 VMware VMMouse: (accel) selected scheme none/0 [ 154.700] (**) VirtualPS/2 VMware VMMouse: (accel) acceleration factor: 2.000 [ 154.700] (**) VirtualPS/2 VMware VMMouse: (accel) acceleration threshold: 4 [ 154.700] (II) event2 - VirtualPS/2 VMware VMMouse: is tagged by udev as: Mouse [ 154.700] (II) event2 - VirtualPS/2 VMware VMMouse: device is a pointer [ 154.700] (II) config/udev: removing device VirtualPS/2 VMware VMMouse [ 154.700] (II) event1 - VirtualPS/2 VMware VMMouse: device removed [ 154.726] (II) UnloadModule: "libinput" [ 154.727] (II) config/udev: Adding input device VirtualPS/2 VMware VMMouse (/dev/input/event1) [ 154.727] (**) VirtualPS/2 VMware VMMouse: Applying InputClass "libinput pointer catchall" [ 154.727] (II) Using input driver 'libinput' for 'VirtualPS/2 VMware VMMouse' [ 154.727] (**) VirtualPS/2 VMware VMMouse: always reports core events [ 154.727] (**) Option "Device" "/dev/input/event1" [ 154.727] (II) event1 - VirtualPS/2 VMware VMMouse: is tagged by udev as: Mouse [ 154.727] (II) event1 - VirtualPS/2 VMware VMMouse: device is a pointer [ 154.727] (II) event1 - VirtualPS/2 VMware VMMouse: device removed [ 154.752] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input3/event1" [ 154.752] (II) XINPUT: Adding extended input device "VirtualPS/2 VMware VMMouse" (type: MOUSE, id 8) [ 154.752] (**) Option "AccelerationScheme" "none" [ 154.752] (**) VirtualPS/2 VMware VMMouse: (accel) selected scheme none/0 [ 154.752] (**) VirtualPS/2 VMware VMMouse: (accel) acceleration factor: 2.000 [ 154.752] (**) VirtualPS/2 VMware VMMouse: (accel) acceleration threshold: 4 [ 154.752] (II) event1 - VirtualPS/2 VMware VMMouse: is tagged by udev as: Mouse [ 154.752] (II) event1 - VirtualPS/2 VMware VMMouse: device is a pointer [ 154.753] (II) config/udev: removing device AT Translated Set 2 keyboard [ 154.753] (II) event0 - AT Translated Set 2 keyboard: device removed [ 154.781] (II) UnloadModule: "libinput" [ 154.781] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0) [ 154.781] (**) AT Translated Set 2 keyboard: Applying InputClass "libinput keyboard catchall" [ 154.781] (II) Using input driver 'libinput' for 'AT Translated Set 2 keyboard' [ 154.781] (**) AT Translated Set 2 keyboard: always reports core events [ 154.781] (**) Option "Device" "/dev/input/event0" [ 154.781] (II) event0 - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard [ 154.781] (II) event0 - AT Translated Set 2 keyboard: device is a keyboard [ 154.782] (II) event0 - AT Translated Set 2 keyboard: device removed [ 154.810] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0" [ 154.810] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 6) [ 154.810] (**) Option "xkb_model" "pc105" [ 154.810] (**) Option "xkb_layout" "us" [ 154.810] (WW) Option "xkb_variant" requires a string value [ 154.810] (WW) Option "xkb_options" requires a string value [ 154.810] (II) event0 - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard [ 154.810] (II) event0 - AT Translated Set 2 keyboard: device is a keyboard [ 480.916] (II) modeset(0): EDID vendor "RHT", prod id 4660 [ 480.916] (II) modeset(0): Using hsync ranges from config file [ 480.916] (II) modeset(0): Using vrefresh ranges from config file [ 480.916] (II) modeset(0): Printing DDC gathered Modelines: [ 480.916] (II) modeset(0): Modeline "1280x800"x0.0 107.30 1280 1600 1638 1728 800 804 808 828 -hsync -vsync (62.1 kHz eP) [ 480.916] (II) modeset(0): Modeline "1280x768"x0.0 79.50 1280 1344 1472 1664 768 771 778 798 -hsync +vsync (47.8 kHz e) [ 480.916] (II) modeset(0): Modeline "1360x768"x0.0 85.50 1360 1424 1536 1792 768 771 777 795 +hsync +vsync (47.7 kHz e) [ 480.916] (II) modeset(0): Modeline "1400x1050"x0.0 121.75 1400 1488 1632 1864 1050 1053 1057 1089 -hsync +vsync (65.3 kHz e) [ 480.916] (II) modeset(0): Modeline "1792x1344"x0.0 204.75 1792 1920 2120 2448 1344 1345 1348 1394 -hsync +vsync (83.6 kHz e) [ 480.916] (II) modeset(0): Modeline "1856x1392"x0.0 218.25 1856 1952 2176 2528 1392 1393 1396 1439 -hsync +vsync (86.3 kHz e) [ 480.916] (II) modeset(0): Modeline "1920x1440"x0.0 234.00 1920 2048 2256 2600 1440 1441 1444 1500 -hsync +vsync (90.0 kHz e) [ 480.916] (II) modeset(0): Modeline "1920x1080"x0.0 148.50 1920 2448 2492 2640 1080 1084 1089 1125 +hsync +vsync (56.2 kHz e) [ 480.916] (II) modeset(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e) [ 480.916] (II) modeset(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e) [ 480.916] (II) modeset(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e) [ 480.916] (II) modeset(0): Modeline "2048x1152"x60.0 197.97 2048 2184 2408 2768 1152 1153 1156 1192 -hsync +vsync (71.5 kHz e) [ 480.916] (II) modeset(0): Modeline "1920x1080"x60.0 172.80 1920 2040 2248 2576 1080 1081 1084 1118 -hsync +vsync (67.1 kHz e) [ 480.916] (II) modeset(0): Modeline "1920x1200"x0.0 193.25 1920 2056 2256 2592 1200 1203 1209 1245 -hsync +vsync (74.6 kHz e) [ 480.916] (II) modeset(0): Modeline "1600x1200"x0.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz e) [ 480.916] (II) modeset(0): Modeline "1680x1050"x0.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz e) [ 480.916] (II) modeset(0): Modeline "1440x900"x0.0 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz e) [ 480.916] (II) modeset(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e) [ 480.916] (II) modeset(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e) [ 480.919] (II) config/udev: removing GPU device /sys/devices/pci0000:00/0000:00:02.0/drm/card0 /dev/dri/card0 [ 480.919] xf86: remove device 0 /sys/devices/pci0000:00/0000:00:02.0/drm/card0 [ 480.919] failed to find screen to remove [ 480.923] (II) config/udev: Adding input device VirtualPS/2 VMware VMMouse (/dev/input/mouse1) [ 480.923] (II) No input driver specified, ignoring this device. [ 480.923] (II) This device may have been added with another device file. [ 480.924] (II) config/udev: Adding input device VirtualPS/2 VMware VMMouse (/dev/input/mouse0) [ 480.924] (II) No input driver specified, ignoring this device. [ 480.924] (II) This device may have been added with another device file. [ 480.936] (II) config/udev: removing device VirtualPS/2 VMware VMMouse [ 480.936] (II) event1 - VirtualPS/2 VMware VMMouse: device removed [ 480.964] (II) UnloadModule: "libinput" [ 480.964] (II) config/udev: Adding input device VirtualPS/2 VMware VMMouse (/dev/input/event1) [ 480.964] (**) VirtualPS/2 VMware VMMouse: Applying InputClass "libinput pointer catchall" [ 480.964] (II) Using input driver 'libinput' for 'VirtualPS/2 VMware VMMouse' [ 480.964] (**) VirtualPS/2 VMware VMMouse: always reports core events [ 480.964] (**) Option "Device" "/dev/input/event1" [ 480.964] (II) event1 - VirtualPS/2 VMware VMMouse: is tagged by udev as: Mouse [ 480.964] (II) event1 - VirtualPS/2 VMware VMMouse: device is a pointer [ 480.964] (II) event1 - VirtualPS/2 VMware VMMouse: device removed [ 480.980] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input3/event1" [ 480.980] (II) XINPUT: Adding extended input device "VirtualPS/2 VMware VMMouse" (type: MOUSE, id 8) [ 480.980] (**) Option "AccelerationScheme" "none" [ 480.980] (**) VirtualPS/2 VMware VMMouse: (accel) selected scheme none/0 [ 480.980] (**) VirtualPS/2 VMware VMMouse: (accel) acceleration factor: 2.000 [ 480.980] (**) VirtualPS/2 VMware VMMouse: (accel) acceleration threshold: 4 [ 480.980] (II) event1 - VirtualPS/2 VMware VMMouse: is tagged by udev as: Mouse [ 480.980] (II) event1 - VirtualPS/2 VMware VMMouse: device is a pointer [ 480.980] (II) config/udev: removing device AT Translated Set 2 keyboard [ 480.980] (II) event0 - AT Translated Set 2 keyboard: device removed [ 480.996] (II) UnloadModule: "libinput" [ 480.996] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0) [ 480.996] (**) AT Translated Set 2 keyboard: Applying InputClass "libinput keyboard catchall" [ 480.996] (II) Using input driver 'libinput' for 'AT Translated Set 2 keyboard' [ 480.996] (**) AT Translated Set 2 keyboard: always reports core events [ 480.996] (**) Option "Device" "/dev/input/event0" [ 480.996] (II) event0 - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard [ 480.996] (II) event0 - AT Translated Set 2 keyboard: device is a keyboard [ 480.996] (II) event0 - AT Translated Set 2 keyboard: device removed [ 481.012] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0" [ 481.012] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 6) [ 481.012] (**) Option "xkb_model" "pc105" [ 481.012] (**) Option "xkb_layout" "us" [ 481.012] (WW) Option "xkb_variant" requires a string value [ 481.012] (WW) Option "xkb_options" requires a string value [ 481.012] (II) event0 - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard [ 481.012] (II) event0 - AT Translated Set 2 keyboard: device is a keyboard [ 481.013] (II) config/udev: removing device VirtualPS/2 VMware VMMouse [ 481.013] (II) event2 - VirtualPS/2 VMware VMMouse: device removed [ 481.020] (II) UnloadModule: "libinput" [ 481.020] (II) config/udev: Adding input device VirtualPS/2 VMware VMMouse (/dev/input/event2) [ 481.020] (**) VirtualPS/2 VMware VMMouse: Applying InputClass "libinput pointer catchall" [ 481.020] (II) Using input driver 'libinput' for 'VirtualPS/2 VMware VMMouse' [ 481.020] (**) VirtualPS/2 VMware VMMouse: always reports core events [ 481.020] (**) Option "Device" "/dev/input/event2" [ 481.020] (II) event2 - VirtualPS/2 VMware VMMouse: is tagged by udev as: Mouse [ 481.020] (II) event2 - VirtualPS/2 VMware VMMouse: device is a pointer [ 481.020] (II) event2 - VirtualPS/2 VMware VMMouse: device removed [ 481.032] (II) libinput: VirtualPS/2 VMware VMMouse: Step value 0 was provided, libinput Fallback acceleration function is used. [ 481.032] (II) libinput: VirtualPS/2 VMware VMMouse: Step value 0 was provided, libinput Fallback acceleration function is used. [ 481.032] (II) libinput: VirtualPS/2 VMware VMMouse: Step value 0 was provided, libinput Fallback acceleration function is used. [ 481.032] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input2/event2" [ 481.032] (II) XINPUT: Adding extended input device "VirtualPS/2 VMware VMMouse" (type: MOUSE, id 7) [ 481.032] (**) Option "AccelerationScheme" "none" [ 481.032] (**) VirtualPS/2 VMware VMMouse: (accel) selected scheme none/0 [ 481.032] (**) VirtualPS/2 VMware VMMouse: (accel) acceleration factor: 2.000 [ 481.032] (**) VirtualPS/2 VMware VMMouse: (accel) acceleration threshold: 4 [ 481.032] (II) event2 - VirtualPS/2 VMware VMMouse: is tagged by udev as: Mouse [ 481.032] (II) event2 - VirtualPS/2 VMware VMMouse: device is a pointer [ 755.339] (II) modeset(0): EDID vendor "RHT", prod id 4660 [ 755.339] (II) modeset(0): Using hsync ranges from config file [ 755.339] (II) modeset(0): Using vrefresh ranges from config file [ 755.339] (II) modeset(0): Printing DDC gathered Modelines: [ 755.339] (II) modeset(0): Modeline "1280x800"x0.0 107.30 1280 1600 1638 1728 800 804 808 828 -hsync -vsync (62.1 kHz eP) [ 755.339] (II) modeset(0): Modeline "1280x768"x0.0 79.50 1280 1344 1472 1664 768 771 778 798 -hsync +vsync (47.8 kHz e) [ 755.339] (II) modeset(0): Modeline "1360x768"x0.0 85.50 1360 1424 1536 1792 768 771 777 795 +hsync +vsync (47.7 kHz e) [ 755.339] (II) modeset(0): Modeline "1400x1050"x0.0 121.75 1400 1488 1632 1864 1050 1053 1057 1089 -hsync +vsync (65.3 kHz e) [ 755.339] (II) modeset(0): Modeline "1792x1344"x0.0 204.75 1792 1920 2120 2448 1344 1345 1348 1394 -hsync +vsync (83.6 kHz e) [ 755.339] (II) modeset(0): Modeline "1856x1392"x0.0 218.25 1856 1952 2176 2528 1392 1393 1396 1439 -hsync +vsync (86.3 kHz e) [ 755.339] (II) modeset(0): Modeline "1920x1440"x0.0 234.00 1920 2048 2256 2600 1440 1441 1444 1500 -hsync +vsync (90.0 kHz e) [ 755.339] (II) modeset(0): Modeline "1920x1080"x0.0 148.50 1920 2448 2492 2640 1080 1084 1089 1125 +hsync +vsync (56.2 kHz e) [ 755.339] (II) modeset(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e) [ 755.339] (II) modeset(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e) [ 755.339] (II) modeset(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e) [ 755.339] (II) modeset(0): Modeline "2048x1152"x60.0 197.97 2048 2184 2408 2768 1152 1153 1156 1192 -hsync +vsync (71.5 kHz e) [ 755.339] (II) modeset(0): Modeline "1920x1080"x60.0 172.80 1920 2040 2248 2576 1080 1081 1084 1118 -hsync +vsync (67.1 kHz e) [ 755.339] (II) modeset(0): Modeline "1920x1200"x0.0 193.25 1920 2056 2256 2592 1200 1203 1209 1245 -hsync +vsync (74.6 kHz e) [ 755.339] (II) modeset(0): Modeline "1600x1200"x0.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz e) [ 755.339] (II) modeset(0): Modeline "1680x1050"x0.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz e) [ 755.339] (II) modeset(0): Modeline "1440x900"x0.0 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz e) [ 755.339] (II) modeset(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e) [ 755.339] (II) modeset(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e) [ 755.341] (II) config/udev: removing GPU device /sys/devices/pci0000:00/0000:00:02.0/drm/card0 /dev/dri/card0 [ 755.341] xf86: remove device 0 /sys/devices/pci0000:00/0000:00:02.0/drm/card0 [ 755.341] failed to find screen to remove [ 755.360] (II) config/udev: Adding input device VirtualPS/2 VMware VMMouse (/dev/input/mouse1) [ 755.360] (II) No input driver specified, ignoring this device. [ 755.360] (II) This device may have been added with another device file. [ 755.362] (II) config/udev: Adding input device VirtualPS/2 VMware VMMouse (/dev/input/mouse0) [ 755.362] (II) No input driver specified, ignoring this device. [ 755.362] (II) This device may have been added with another device file. [ 755.374] (II) config/udev: removing device VirtualPS/2 VMware VMMouse [ 755.374] (II) event1 - VirtualPS/2 VMware VMMouse: device removed [ 755.388] (II) UnloadModule: "libinput" [ 755.388] (II) config/udev: Adding input device VirtualPS/2 VMware VMMouse (/dev/input/event1) [ 755.388] (**) VirtualPS/2 VMware VMMouse: Applying InputClass "libinput pointer catchall" [ 755.388] (II) Using input driver 'libinput' for 'VirtualPS/2 VMware VMMouse' [ 755.388] (**) VirtualPS/2 VMware VMMouse: always reports core events [ 755.388] (**) Option "Device" "/dev/input/event1" [ 755.388] (II) event1 - VirtualPS/2 VMware VMMouse: is tagged by udev as: Mouse [ 755.388] (II) event1 - VirtualPS/2 VMware VMMouse: device is a pointer [ 755.388] (II) event1 - VirtualPS/2 VMware VMMouse: device removed [ 755.400] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input3/event1" [ 755.400] (II) XINPUT: Adding extended input device "VirtualPS/2 VMware VMMouse" (type: MOUSE, id 8) [ 755.400] (**) Option "AccelerationScheme" "none" [ 755.400] (**) VirtualPS/2 VMware VMMouse: (accel) selected scheme none/0 [ 755.400] (**) VirtualPS/2 VMware VMMouse: (accel) acceleration factor: 2.000 [ 755.400] (**) VirtualPS/2 VMware VMMouse: (accel) acceleration threshold: 4 [ 755.400] (II) event1 - VirtualPS/2 VMware VMMouse: is tagged by udev as: Mouse [ 755.400] (II) event1 - VirtualPS/2 VMware VMMouse: device is a pointer [ 755.400] (II) config/udev: removing device AT Translated Set 2 keyboard [ 755.401] (II) event0 - AT Translated Set 2 keyboard: device removed [ 755.416] (II) UnloadModule: "libinput" [ 755.416] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0) [ 755.416] (**) AT Translated Set 2 keyboard: Applying InputClass "libinput keyboard catchall" [ 755.416] (II) Using input driver 'libinput' for 'AT Translated Set 2 keyboard' [ 755.416] (**) AT Translated Set 2 keyboard: always reports core events [ 755.416] (**) Option "Device" "/dev/input/event0" [ 755.416] (II) event0 - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard [ 755.416] (II) event0 - AT Translated Set 2 keyboard: device is a keyboard [ 755.416] (II) event0 - AT Translated Set 2 keyboard: device removed [ 755.436] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0" [ 755.436] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 6) [ 755.436] (**) Option "xkb_model" "pc105" [ 755.436] (**) Option "xkb_layout" "us" [ 755.436] (WW) Option "xkb_variant" requires a string value [ 755.436] (WW) Option "xkb_options" requires a string value [ 755.436] (II) event0 - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard [ 755.436] (II) event0 - AT Translated Set 2 keyboard: device is a keyboard [ 755.438] (II) config/udev: removing device VirtualPS/2 VMware VMMouse [ 755.438] (II) event2 - VirtualPS/2 VMware VMMouse: device removed [ 755.460] (II) UnloadModule: "libinput" [ 755.460] (II) config/udev: Adding input device VirtualPS/2 VMware VMMouse (/dev/input/event2) [ 755.460] (**) VirtualPS/2 VMware VMMouse: Applying InputClass "libinput pointer catchall" [ 755.460] (II) Using input driver 'libinput' for 'VirtualPS/2 VMware VMMouse' [ 755.460] (**) VirtualPS/2 VMware VMMouse: always reports core events [ 755.460] (**) Option "Device" "/dev/input/event2" [ 755.460] (II) event2 - VirtualPS/2 VMware VMMouse: is tagged by udev as: Mouse [ 755.460] (II) event2 - VirtualPS/2 VMware VMMouse: device is a pointer [ 755.460] (II) event2 - VirtualPS/2 VMware VMMouse: device removed [ 755.480] (II) libinput: VirtualPS/2 VMware VMMouse: Step value 0 was provided, libinput Fallback acceleration function is used. [ 755.480] (II) libinput: VirtualPS/2 VMware VMMouse: Step value 0 was provided, libinput Fallback acceleration function is used. [ 755.480] (II) libinput: VirtualPS/2 VMware VMMouse: Step value 0 was provided, libinput Fallback acceleration function is used. [ 755.480] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input2/event2" [ 755.480] (II) XINPUT: Adding extended input device "VirtualPS/2 VMware VMMouse" (type: MOUSE, id 7) [ 755.480] (**) Option "AccelerationScheme" "none" [ 755.480] (**) VirtualPS/2 VMware VMMouse: (accel) selected scheme none/0 [ 755.480] (**) VirtualPS/2 VMware VMMouse: (accel) acceleration factor: 2.000 [ 755.480] (**) VirtualPS/2 VMware VMMouse: (accel) acceleration threshold: 4 [ 755.480] (II) event2 - VirtualPS/2 VMware VMMouse: is tagged by udev as: Mouse [ 755.480] (II) event2 - VirtualPS/2 VMware VMMouse: device is a pointer [ 895.931] (II) modeset(0): EDID vendor "RHT", prod id 4660 [ 895.931] (II) modeset(0): Using hsync ranges from config file [ 895.931] (II) modeset(0): Using vrefresh ranges from config file [ 895.931] (II) modeset(0): Printing DDC gathered Modelines: [ 895.931] (II) modeset(0): Modeline "1280x800"x0.0 107.30 1280 1600 1638 1728 800 804 808 828 -hsync -vsync (62.1 kHz eP) [ 895.931] (II) modeset(0): Modeline "1280x768"x0.0 79.50 1280 1344 1472 1664 768 771 778 798 -hsync +vsync (47.8 kHz e) [ 895.931] (II) modeset(0): Modeline "1360x768"x0.0 85.50 1360 1424 1536 1792 768 771 777 795 +hsync +vsync (47.7 kHz e) [ 895.931] (II) modeset(0): Modeline "1400x1050"x0.0 121.75 1400 1488 1632 1864 1050 1053 1057 1089 -hsync +vsync (65.3 kHz e) [ 895.931] (II) modeset(0): Modeline "1792x1344"x0.0 204.75 1792 1920 2120 2448 1344 1345 1348 1394 -hsync +vsync (83.6 kHz e) [ 895.931] (II) modeset(0): Modeline "1856x1392"x0.0 218.25 1856 1952 2176 2528 1392 1393 1396 1439 -hsync +vsync (86.3 kHz e) [ 895.931] (II) modeset(0): Modeline "1920x1440"x0.0 234.00 1920 2048 2256 2600 1440 1441 1444 1500 -hsync +vsync (90.0 kHz e) [ 895.931] (II) modeset(0): Modeline "1920x1080"x0.0 148.50 1920 2448 2492 2640 1080 1084 1089 1125 +hsync +vsync (56.2 kHz e) [ 895.931] (II) modeset(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e) [ 895.931] (II) modeset(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e) [ 895.931] (II) modeset(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e) [ 895.931] (II) modeset(0): Modeline "2048x1152"x60.0 197.97 2048 2184 2408 2768 1152 1153 1156 1192 -hsync +vsync (71.5 kHz e) [ 895.931] (II) modeset(0): Modeline "1920x1080"x60.0 172.80 1920 2040 2248 2576 1080 1081 1084 1118 -hsync +vsync (67.1 kHz e) [ 895.931] (II) modeset(0): Modeline "1920x1200"x0.0 193.25 1920 2056 2256 2592 1200 1203 1209 1245 -hsync +vsync (74.6 kHz e) [ 895.931] (II) modeset(0): Modeline "1600x1200"x0.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz e) [ 895.931] (II) modeset(0): Modeline "1680x1050"x0.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz e) [ 895.931] (II) modeset(0): Modeline "1440x900"x0.0 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz e) [ 895.931] (II) modeset(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e) [ 895.931] (II) modeset(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e) [ 895.933] (II) config/udev: removing GPU device /sys/devices/pci0000:00/0000:00:02.0/drm/card0 /dev/dri/card0 [ 895.933] xf86: remove device 0 /sys/devices/pci0000:00/0000:00:02.0/drm/card0 [ 895.933] failed to find screen to remove [ 895.947] (II) config/udev: Adding input device VirtualPS/2 VMware VMMouse (/dev/input/mouse1) [ 895.947] (II) No input driver specified, ignoring this device. [ 895.947] (II) This device may have been added with another device file. [ 895.949] (II) config/udev: Adding input device VirtualPS/2 VMware VMMouse (/dev/input/mouse0) [ 895.949] (II) No input driver specified, ignoring this device. [ 895.949] (II) This device may have been added with another device file. [ 895.959] (II) config/udev: removing device VirtualPS/2 VMware VMMouse [ 895.959] (II) event2 - VirtualPS/2 VMware VMMouse: device removed [ 895.972] (II) UnloadModule: "libinput" [ 895.972] (II) config/udev: Adding input device VirtualPS/2 VMware VMMouse (/dev/input/event2) [ 895.972] (**) VirtualPS/2 VMware VMMouse: Applying InputClass "libinput pointer catchall" [ 895.972] (II) Using input driver 'libinput' for 'VirtualPS/2 VMware VMMouse' [ 895.972] (**) VirtualPS/2 VMware VMMouse: always reports core events [ 895.972] (**) Option "Device" "/dev/input/event2" [ 895.972] (II) event2 - VirtualPS/2 VMware VMMouse: is tagged by udev as: Mouse [ 895.972] (II) event2 - VirtualPS/2 VMware VMMouse: device is a pointer [ 895.972] (II) event2 - VirtualPS/2 VMware VMMouse: device removed [ 895.984] (II) libinput: VirtualPS/2 VMware VMMouse: Step value 0 was provided, libinput Fallback acceleration function is used. [ 895.984] (II) libinput: VirtualPS/2 VMware VMMouse: Step value 0 was provided, libinput Fallback acceleration function is used. [ 895.984] (II) libinput: VirtualPS/2 VMware VMMouse: Step value 0 was provided, libinput Fallback acceleration function is used. [ 895.984] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input2/event2" [ 895.984] (II) XINPUT: Adding extended input device "VirtualPS/2 VMware VMMouse" (type: MOUSE, id 7) [ 895.984] (**) Option "AccelerationScheme" "none" [ 895.984] (**) VirtualPS/2 VMware VMMouse: (accel) selected scheme none/0 [ 895.984] (**) VirtualPS/2 VMware VMMouse: (accel) acceleration factor: 2.000 [ 895.984] (**) VirtualPS/2 VMware VMMouse: (accel) acceleration threshold: 4 [ 895.984] (II) event2 - VirtualPS/2 VMware VMMouse: is tagged by udev as: Mouse [ 895.984] (II) event2 - VirtualPS/2 VMware VMMouse: device is a pointer [ 895.984] (II) config/udev: removing device AT Translated Set 2 keyboard [ 895.984] (II) event0 - AT Translated Set 2 keyboard: device removed [ 896.000] (II) UnloadModule: "libinput" [ 896.000] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0) [ 896.000] (**) AT Translated Set 2 keyboard: Applying InputClass "libinput keyboard catchall" [ 896.000] (II) Using input driver 'libinput' for 'AT Translated Set 2 keyboard' [ 896.000] (**) AT Translated Set 2 keyboard: always reports core events [ 896.000] (**) Option "Device" "/dev/input/event0" [ 896.000] (II) event0 - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard [ 896.000] (II) event0 - AT Translated Set 2 keyboard: device is a keyboard [ 896.000] (II) event0 - AT Translated Set 2 keyboard: device removed [ 896.016] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0" [ 896.016] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 6) [ 896.016] (**) Option "xkb_model" "pc105" [ 896.016] (**) Option "xkb_layout" "us" [ 896.016] (WW) Option "xkb_variant" requires a string value [ 896.016] (WW) Option "xkb_options" requires a string value [ 896.016] (II) event0 - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard [ 896.016] (II) event0 - AT Translated Set 2 keyboard: device is a keyboard [ 896.017] (II) config/udev: removing device VirtualPS/2 VMware VMMouse [ 896.017] (II) event1 - VirtualPS/2 VMware VMMouse: device removed [ 896.028] (II) UnloadModule: "libinput" [ 896.028] (II) config/udev: Adding input device VirtualPS/2 VMware VMMouse (/dev/input/event1) [ 896.028] (**) VirtualPS/2 VMware VMMouse: Applying InputClass "libinput pointer catchall" [ 896.028] (II) Using input driver 'libinput' for 'VirtualPS/2 VMware VMMouse' [ 896.028] (**) VirtualPS/2 VMware VMMouse: always reports core events [ 896.028] (**) Option "Device" "/dev/input/event1" [ 896.028] (II) event1 - VirtualPS/2 VMware VMMouse: is tagged by udev as: Mouse [ 896.028] (II) event1 - VirtualPS/2 VMware VMMouse: device is a pointer [ 896.028] (II) event1 - VirtualPS/2 VMware VMMouse: device removed [ 896.048] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input3/event1" [ 896.048] (II) XINPUT: Adding extended input device "VirtualPS/2 VMware VMMouse" (type: MOUSE, id 8) [ 896.048] (**) Option "AccelerationScheme" "none" [ 896.048] (**) VirtualPS/2 VMware VMMouse: (accel) selected scheme none/0 [ 896.048] (**) VirtualPS/2 VMware VMMouse: (accel) acceleration factor: 2.000 [ 896.048] (**) VirtualPS/2 VMware VMMouse: (accel) acceleration threshold: 4 [ 896.048] (II) event1 - VirtualPS/2 VMware VMMouse: is tagged by udev as: Mouse [ 896.048] (II) event1 - VirtualPS/2 VMware VMMouse: device is a pointer